{"id":827,"date":"2010-07-17T22:48:50","date_gmt":"2010-07-18T03:48:50","guid":{"rendered":"http:\/\/www.rpwoodwork.com\/blog\/?p=827"},"modified":"2013-04-19T23:23:41","modified_gmt":"2013-04-20T04:23:41","slug":"working-with-the-veritas-scraping-plane-part-1","status":"publish","type":"post","link":"https:\/\/www.rpwoodwork.com\/blog\/2010\/07\/17\/working-with-the-veritas-scraping-plane-part-1\/","title":{"rendered":"Working with the Veritas scraping plane, part 1"},"content":{"rendered":"<p style=\"TEXT-ALIGN: center\"><a href=\"https:\/\/www.rpwoodwork.com\/blog\/wp-content\/uploads\/2010\/07\/img_1407_edited-2.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"size-full wp-image-828    aligncenter\" title=\"img_1407_edited-2\" src=\"https:\/\/www.rpwoodwork.com\/blog\/wp-content\/uploads\/2010\/07\/img_1407_edited-2.jpg\" alt=\"\" width=\"500\" height=\"318\" \/><\/a><\/p>\n<p style=\"TEXT-ALIGN: left\">Here are my preferences in a <strong>scraping plane<\/strong>, followed by the styles that are thus <em>disqualified<\/em> in parentheses:<\/p>\n<ul style=\"TEXT-ALIGN: left\">\n<li>a <strong>sole long enough<\/strong> relative to its width\u00a0to register on the work and not &#8220;fall off&#8221; at the end of a stroke (not: Stanley #80 and other spokeshave-like styles)<\/li>\n<li>an<strong>\u00a0adjustable frog angle<\/strong>\u00a0(not: #&#8217;s 80, 85, Veritas small scraping plane)<\/li>\n<li>a mechanism to camber <strong>(bow) the blade<\/strong> (not: #&#8217;s 80, 85, 12, 112, 212, Veritas small)<\/li>\n<li>a mechanism to easily and precisely <strong>fine tune the depth of cut<\/strong> (not: #&#8217;s 80, 85, Veritas small)<\/li>\n<\/ul>\n<p style=\"TEXT-ALIGN: left\">I know of only one manufactured tool that meets all these criteria: the <a href=\"http:\/\/www.leevalley.com\/US\/wood\/page.aspx?cat=1,310&amp;p=48431\" target=\"_blank\">Veritas large scraping plane<\/a>. All of this is a matter of personal preference, and there are many other high quality scraping planes available, most notably from <a href=\"http:\/\/www.lie-nielsen.com\/catalog.php?cat=508\" target=\"_blank\">Lie-Nielsen<\/a>, that you may like better. <strong>I will explain why I like the Veritas<\/strong>, a patented, unique tool.<\/p>\n<p>The deal-sealer for me is that <strong>the blade can be bowed<\/strong>. This is done by simply applying pressure with a thumbscrew which meets the lower back of the blade. This does more than just avoid the corners of the blade from digging in. That effect, after all, could be accomplished on a non-bowed blade just by cambering the cutting edge (and\/or rounding the corners) in the sharpening process, <a href=\"https:\/\/www.rpwoodwork.com\/blog\/2009\/05\/21\/how-much-camber-should-be-in-plane-irons\/\" target=\"_blank\">just as one might do with a plane blade<\/a>. More important, this bowing <strong>pre-tensions the cutting edge<\/strong>, just as you do with your fingers when using a card scraper. This greatly helps\u00a0reduce blade chatter.<\/p>\n<p>The <strong>frog angle adjustment mechanism<\/strong> can be set just right considering the angle at which you burnished the blade, the wood, the desired aggressiveness of the cut, and the state of wear of the blade\u2019s hook. I sharpen the blade bevel at about the standard 45<span style=\"font-family: Times New Roman;\">\u030a<\/span>, and take the final burnishing passes at about 15<span style=\"font-family: Times New Roman;\">\u030a<\/span> off horizontal. I set the frog at the same angle that the blade lightly bites into the wood <strong>when held by hand<\/strong>. This is usually somewhere around 10-12<span style=\"font-family: Times New Roman;\">\u030a<\/span> forward of vertical for a fresh hook.<\/p>\n<p>Just as important, this mechanism acts as a <strong>very precise depth of cut adjuster<\/strong>. Because the pivot point of the frog is slightly behind (closer to the tote than) the point where the blade meets the wood, slightly tilting the frog further forward from vertical will deepen the blade projection (depth of cut).<\/p>\n<p><strong>The procedure to do this precisely is somewhat counterintuitive<\/strong>. To tilt the frog less (shallower cut), spin the front nut away from the thread housing to create clearance, put light forward pressure against the frog, and &#8220;tighten&#8221; the rear nut against the housing. Retighten the front nut. To tilt the frog more (deeper cut), spin the rear nut away from the housing, put light rearward pressure against the frog, and turn the front nut against the housing. Retighten the rear nut. This method allows you to see and feel the frog moving slowly and precisely.<\/p>\n<p><strong>Next, I will discuss blade options.<\/strong><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Here are my preferences in a scraping plane, followed by the styles that are thus disqualified in parentheses: a sole long enough relative to its width\u00a0to register on the work and not &#8220;fall off&#8221; at the end of a stroke (not: Stanley #80 and other spokeshave-like styles) an\u00a0adjustable frog angle\u00a0(not: #&#8217;s 80, 85, Veritas small [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[6],"tags":[20],"class_list":["post-827","post","type-post","status-publish","format-standard","hentry","category-tools-and-shop","tag-working-with-the-veritas-scraping-plane-series"],"_links":{"self":[{"href":"https:\/\/www.rpwoodwork.com\/blog\/wp-json\/wp\/v2\/posts\/827","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.rpwoodwork.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.rpwoodwork.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.rpwoodwork.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.rpwoodwork.com\/blog\/wp-json\/wp\/v2\/comments?post=827"}],"version-history":[{"count":5,"href":"https:\/\/www.rpwoodwork.com\/blog\/wp-json\/wp\/v2\/posts\/827\/revisions"}],"predecessor-version":[{"id":2293,"href":"https:\/\/www.rpwoodwork.com\/blog\/wp-json\/wp\/v2\/posts\/827\/revisions\/2293"}],"wp:attachment":[{"href":"https:\/\/www.rpwoodwork.com\/blog\/wp-json\/wp\/v2\/media?parent=827"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.rpwoodwork.com\/blog\/wp-json\/wp\/v2\/categories?post=827"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.rpwoodwork.com\/blog\/wp-json\/wp\/v2\/tags?post=827"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}